EMT Practice Test

1. Question Content...

---

Question1: In setting up a storage and search retention period for log analyzer, what is the default retention period?

Question2: Which switch model is supported in network insight?

Question3: Which two of the following functions are tied to SolarWinds' MIB database? (Choose two.)

Question4: Which two of the following services can be monitored in network insight with network health, performance monitor, and NCM features installed in hybrid cloud observability? (Choose two.)

Question5: What is the default amount of historical data needed for calculating capacity forecast?

Question6: Several resources are showing duplicate flow data. What is the most likely cause?

Question7: Which two of the following effects would apply to a situation where a NetPath probe polling interval is increased to 15 minutes from the default value of 10 minutes? (Choose two.)

Question8: On which two of the following occasions do custom pollers need to be created? (Choose two.)

Question9: Probing interval determines how often and how long information is polled from the network path. Which two of the following statements are true regarding probing intervals? (Choose two.)

Question10: What is the minimum amount of RAM required for setting up log collection in hybrid cloud observability?

Question11: From which two of the following locations can the status of the flow collector service be checked? (Choose two.)

Question12: How does data collection with a flow collector differ from data collection with a polling engine?

Question13: Which two of the following requirements are needed to set up network devices and export NetFlow data?
(Choose two.)

Question14: What is the maximum number of resources that can be displayed in flow charts created by SolarWinds' platform views?

Question15: If an SNMP community string is changed on a device, which two of the following steps are required to re-establish successful polling on the node? (Choose two.)

Question16: If an IP address group is hidden in IP address groups management, what impact will it have on the data?

Question17: What is needed to edit trigger conditions in flow alerts?

Question18: The status of the interfaces for a network switch shows as "unknown" in SolarWinds' platform web console, although the node status is "up". What could be the reason?

Question19: Which two of the following locations can be checked for network hardware health functionality? (Choose two.)

Question20: Which two of the following requirements are needed to monitor an application on a server? (Choose two.)

Question21: When attempting to add universal device poller (UDP) results to a new chart widget, none of the custom poller results are displayed. If the web console switches to another view, the data appears in the chart. What is the most likely resolution?

Question22: If a NetFlow collector service is showing a "down" status, which two of the following steps are possible troubleshooting options? (Choose two.)

Question23: A universal device poller (UDP) is being built for a metric to monitor in a radial gauge of a web console.
When a gauge resource in the poller is to be selected, it is found that the resource is grayed out. What could be causing this?

Question24: A "no data" message is displayed in NetFlow charts. How can this be resolved?

Question25: Upon logging into the web console to check node statuses, it is noted that several nodes display a "down" status when they are up and running. Which two of the following situations are the likely causes of this issue?
(Choose two.)

Question26: Which tool is used to establish flow alerts?

Question27: In which two of the following cases does duplicate flow data occur? (Choose two.)

Question28: Which two of the following tools are available for troubleshooting network node connectivity issues? (Choose two.)

Question29: What is required to submit an MIB database update request to SolarWinds?

Question30: The unclassified traffic in the web console has been identified as MSSQL traffic. It is known as an application mapping that hybrid cloud observability maps by default. Which two of the following reasons explain why the traffic is showing as unclassified? (Choose two.)

Question31: On a single node, one or more interfaces are showing an "unknown" status. What is the best way to resolve the issue?

Question32: A poller is to be built that will add two values together to show a single value in the web console using the universal device poller (UDP) tool. How would this be accomplished?

Question33: Which SNMP version allows usernames and passwords?

Question34: When creating a new rule action, what is the best option to enable if too many events trigger the rule within a short time?

Question35: Which tool in the web console will verify the object ID (OID) being used is a match for the node being created for a custom poller?

Question36: A network discovery profile for a network area completes with most devices discovered, except for a few SNMP enabled network devices. These undiscovered devices are verified to be operational and respond to SNMP queries.
What could be the cause?

Question37: Which two of the following actions can be taken to resolve unknown flow traffic events? (Choose two.)

Question38: Which status rollup mode displays groups defined as collections of redundant or backup devices?

Question39: Which statement is true regarding universal device pollers (UDP)?

Question40: Upon examining bandwidth utilization, it is confirmed that the total utilization and flow numbers do not match. What is the likely cause?

Question41: Which port needs to be open in order to analyze flow and monitor CBQoS?

Question42: Which additional polling method is needed after adding an F5 load balancing node for SNMP monitoring?

Question43: Flow data is not generating from a device in the web console. Wireshark was used to confirm the flows are being sent from the device to the poller and not blocked by the firewall. Why is the data not showing in the web console?

Question44: A device studio poller is being built for the node details widget. The plan is to add a field for serial numbers.
How would this be accomplished?

Question45: SNMP traps are being received from several devices. While most of the traps are normal, traps from one of the devices contain fields that are unreadable. The device is not being monitored in any other way. Which two of the following points should be checked? (Choose two.)

Question46: The below error message is received.

How should this error be resolved?

Question47: A node has been added to hybrid cloud observability and shows an "unknown" status until the data is polled.
The default interval for polling status is two minutes.
If the node stays in the "unknown" status longer than the polling interval, which three of the following steps can be performed to resolve the issue? (Choose three.)

Question48: An agent is deployed to the Windows server in order to monitor logs, however logs are not coming in from the related agent. It is confirmed that the agent software is deployed and installed on the target machine.
What additional setting needs to be checked?

Question49: In which scenario would the device studio poller tool be considered the best tool for building a required poller?

Question50: Which SNMP version will support MD5, SHA1, SHA256, and SHA512 authentication in SolarWinds' platform?

Question51: In live mode, how frequently is log viewer data automatically refreshed?

Question52: Which two of the following tasks must be accomplished to monitor servers and connections in a load-balancing environment? (Choose two.)

Question53: What network capacity planning method is suitable for important devices and connections?

Question54: A network router node using ICMP polling has a green status icon and shows basic information (i.e., status) but is not showing more detailed statistics. What might resolve this issue?

Question55: Which option is available when choosing the collect Windows events without an agent so that Windows event logs can be recognized?

Question56: A NetPath probe is to be built to monitor the paths between two sites. No Windows servers are available to run the agent. Which two of the following options can be used to set up the probe? (Choose two.)

Question57: Which custom filter allows a user to view specific statistics about an entire network and its devices without having to navigate through the web console by single-device views?

Question58: It is noted in flow source view that some devices are showing "never received" in the last received flow column. It is verified that the flows are not being blocked by a firewall. What is the likely cause?

Question59: What is the default amount of historical data needed for calculating capacity forecast?

Question60: Through which means does NetFlow traffic analysis (NTA) process flow data?

Question61: Which two of the following flow sources are supported by hybrid cloud observability? (Choose two.)

Question62: When a parent object goes down or becomes unresponsive, all interfaces on the switch will also be unresponsive. Though they may be working, "unreachable" status is used because the parent node reports as
"down" and a status cannot be determined. Any alerts where the trigger condition includes node status equal to
"down" are not triggered.
In which section of SolarWinds' platform can an administrator configure the status of child objects as
"unreachable" instead of "down" or "unknown"?

Question63: A universal device poller (UDP) was created on the main polling engine to collect CPU temperature for routers polled by the main polling engine and switches polled by the additional polling engine. It is noted that statistics from the switches are missing.
What is the likely cause of the missing statistics?

Question64: If the data collected for hardware health is incorrect, which step could rectify the issue?

Question65: Which three of the following steps should be taken to troubleshoot a 'test failed' result for SNMP nodes in hybrid cloud observability? (Choose three.)

Question66: A node is being polled. The only data visible is response time and packet loss. Detailed statistics are needed.
How should this issue be resolved?

Question67: On which two of the following port does log analyzer listen for TCP syslog messages? (Choose two.)

Question68: What is a possible result of decreasing the top talking optimization value?

Question69: Which three of the following setting can be used to customize the thresholds for an object in SolarWinds' platform? (Choose three.)

Question70: SNMP get type defines the SNMP polling method used by a universal device poller (UDP) to get the device's object ID (OID) values.
Which SNMP get type retrieves values from a particular column?